logo
Contact Us

Contact Person : Phoebe Yu

Phone Number : 8618620854039

WhatsAPP : +8618620854039

Free call

ST840E2-28 OCT Spectrometer 250 kHz Keyhole Depth Measurement Industrial System for Laser Welding

Minimum Order Quantity : 1 Price : USD20600 - USD22600
Packaging Details : International Shipping Package Delivery Time : 40-60 WORKING DAYS
Payment Terms : T/T,Western Union Supply Ability : 100PCS per 40-60 working days
Place of Origin: CHINA Brand Name: JINSP
Certification: ISO9001 Model Number: ST840E-28
Document: ST840E-28 OCT Spectrometer.pdf

Detail Information

Wavelength Range: 840nm±14nm Weight: 2.5 Kg
Model Name: Optical Coherence Tomography(OCT) Spectrometer Effective Pixels: 2048 Pixels
Sensing Area: 20.4*0.2mm Line Scan Rate: 130kHz Or 250kHz
Highlight:

OCT spectrometer 250 kHz

,

OCT spectrometer laser welding

,

OCT spectrometer depth measurement

Product Description

ST840E2-28: 250 kHz Keyhole Depth Measurement for High-Speed Laser Welding

When a remote welding scanner moves the focal spot at several metres per minute, a depth sensor that samples once per second records almost nothing. The ST840E2-28 was configured for exactly this problem: an E2V camera behind a VPH-grating spectrometer bench, streaming over CameraLink at up to 250 000 lines per second, so every millimetre of seam travel carries a depth reading.


The optical bench delivers 12.9 mm imaging depth with 0.015 nm optical resolution and 11.2 µm axial resolution in air. That combination matters for keyhole measurement: the deep range keeps the root of the weld inside the field of view, while the fine axial resolution separates the molten boundary from the solid metal behind it, which is what allows a depth value rather than a vague intensity trace.


Where the extra speed pays for itself

Scenario Why 250 kHz matters
Remote scanner welding Spot dwell time per position can be a few milliseconds, so the higher line rate keeps enough A-scans per weld spot.
Wobble and oscillating welding The beam sweeps across the joint, and fast sampling resolves depth at each point of the oscillation.
High-throughput cell Cycle times under ten seconds leave no room for a separate inspection station.
Thin foil stacks Small depth differences demand dense sampling to average out plume interference.


Signal quality and stability

A high-efficiency VPH grating keeps diffraction-limited resolution without the throughput loss of conventional ruled gratings, and the excellent roll-off characteristic of the bench means the signal-to-noise ratio stays usable at the far end of the 12.9 mm range. The result is a depth reading that does not drift as the keyhole deepens, which is the usual failure mode of shallow-range spectral-domain systems pushed beyond their design envelope.


No frequent recalibration is required. The bench is a mature, stable design with a sealed optical path, and the FC/APC fiber interface tolerates the vibration of a robot wrist. Units run from 11–24 VDC with PoCXP support and consume under 10 W, so they can be powered from the same rail as the welding head.


Specifications

Parameter ST840E2-28
Model ST840E-28 series (ST840E1-28 / ST840E2-28)
Detector type Linear CMOS, 2048 pixels
Pixel size 10 × 200 µm
Photosensitive area 20.4 × 0.2 mm
Center wavelength 840 nm
Spectral bandwidth 28 nm
Optical resolution 0.015 nm
Imaging depth 12.9 mm
Axial resolution 11.2 µm in air
Max. line scan rate 130 kHz (USB 3.0) / 250 kHz (CameraLink)
Fiber interface FC/APC
ADC bit depth 8 / 10 / 12 bit
Power supply 11–24 VDC, PoCXP supported
Power consumption < 10 W
Dimensions 312.5 × 166 × 80.5 mm
Weight 2.5 kg
Operating temperature 0°C to 50°C


Data handling

CameraLink output is delivered as raw spectral frames; reconstruction into depth profiles runs on the host or on an embedded processing board supplied by the integrator. JINSP provides the SDK, the wavelength calibration file and the dispersion coefficients so that a full A-scan reconstruction can be implemented in a few days rather than a few weeks. Depth traces can be pushed to a PLC over a fieldbus gateway for closed-loop power control.


Typical deployments

The ST840E2-28 is most often specified for remote laser welding of body-in-white closures, high-speed seam welding of tube, and battery pack busbar welding lines where the takt time is fixed by the cell rather than by the inspection.

ST840E2-28 OCT Spectrometer 250 kHz Keyhole Depth Measurement Industrial System for Laser Welding

ST840E2-28 OCT Spectrometer 250 kHz Keyhole Depth Measurement Industrial System for Laser Welding

ST840E2-28 OCT Spectrometer 250 kHz Keyhole Depth Measurement Industrial System for Laser Welding

Company Introduction:

JINSP Company Limited has received the National Science and Technology Commission Scientific and Technological Achievement Appraisal Certificate and the China Patent Excellence Award. Related products have earned the Geneva International Invention Award, the Beijing New Technology and New Product Certificate and the Zhu Liangyi Analytical Instrument Innovation Award. JINSP has focused on molecular spectroscopy and OCT spectral detection for more than 19 years and supplies OCT spectrometers, laboratory and online Raman analyzers, and on-site rapid identifiers to industrial customers worldwide. OEM customers receive a dedicated technical contact for the duration of the integration project.

ST840E2-28 OCT Spectrometer 250 kHz Keyhole Depth Measurement Industrial System for Laser WeldingST840E2-28 OCT Spectrometer 250 kHz Keyhole Depth Measurement Industrial System for Laser Welding

FAQ:

Q1: What line rate does the ST840E2-28 reach?


A1: Up to 250 kHz over CameraLink, using an E2V camera. The ST840E1-28 variant reaches 130 kHz over USB 3.0.


Q2: Is the 12.9 mm depth available at full speed?


A2: Yes. The imaging depth is set by the optical bench, not by the readout rate, so the full 12.9 mm range remains available at 250 kHz.


Q3: Can depth data drive closed-loop laser power control?


A3: Yes. Depth traces can be streamed to a PLC or weld controller through a fieldbus gateway, enabling power modulation based on measured penetration.


Q4: How is the unit delivered?


A4: In international shipping packaging, 40–60 working days after order, with T/T or Western Union payment.

You Might Be Into These
Get in touch with us

Enter Your Message

sales@jinsptech.com
+8618620854039
8618620854039
8618620854039