logo
Contact Us

Contact Person : Phoebe Yu

Phone Number : 8618620854039

WhatsAPP : +8618620854039

Free call

ST840E-28 OCT Depth Sensor Battery Tab Laser Welding Inline Inspection

Minimum Order Quantity : 1 Price : USD20600 - USD22600
Packaging Details : International Shipping Package Delivery Time : 40-60 WORKING DAYS
Payment Terms : T/T,Western Union Supply Ability : 100PCS per 40-60 working days
Place of Origin: CHINA Brand Name: JINSP
Certification: ISO9001 Model Number: ST840E-28
Document: ST840E-28 OCT Spectrometer.pdf

Detail Information

Wavelength Range: 840nm±14nm Weight: 2.5 Kg
Model Name: Optical Coherence Tomography(OCT) Spectrometer Effective Pixels: 2048 Pixels
Sensing Area: 20.4*0.2mm Line Scan Rate: 130kHz Or 250kHz

Product Description

Inline Battery Tab and Busbar Weld Inspection with the ST840E-28 OCT Depth Sensor

Battery pack assembly concentrates hundreds of laser welds into a few square metres of floor space. Tab-to-busbar joints, current collector welds and module interconnect welds are made in fractions of a second, and a single incomplete penetration becomes a resistance hotspot that only appears months later in the field. The ST840E-28 OCT depth sensor measures each of those welds as it is made, without touching the part and without adding a station to the line.


The measurement principle is interferometric: near-infrared light at 840 nm is split, sent to the sample and to a reference arm, and the recombined spectrum reveals the optical path difference, which converts into a depth. With 12.9 mm of imaging depth and 11.2 µm axial resolution in air, the sensor can follow a keyhole through a copper or aluminium stack and report the remaining ligament thickness at the root.


Welds that benefit most

Battery weld What OCT verifies
Tab to busbar (Cu/Al) Incomplete or excessive penetration causing current crowding at the joint.
Current collector foil stack Root depth across a multi-layer foil weld where the layers are only tens of microns thick.
Module frame seal weld Leak path continuity along a long, thin seam.
Pack enclosure weld Penetration consistency for IP-rated enclosures.


Copper, aluminium and mixed stacks

Copper reflects strongly at 840 nm and aluminium changes reflectivity with surface oxide, so the reconstruction software includes per-material gain profiles. JINSP supports customers through a sample evaluation stage in which the actual tab and busbar materials are measured, the depth calibration is verified, and the acceptance window for the specific joint is defined before the system goes to the line.


Specification summary

Parameter ST840E-28 Specification
Model ST840E-28 series (ST840E1-28 / ST840E2-28)
Detector type Linear CMOS, 2048 pixels
Pixel size 10 × 200 µm
Photosensitive area 20.4 × 0.2 mm
Center wavelength 840 nm
Spectral bandwidth 28 nm
Optical resolution 0.015 nm
Imaging depth 12.9 mm
Axial resolution 11.2 µm in air
Max. line scan rate 130 kHz (USB 3.0) / 250 kHz (CameraLink)
Fiber interface FC/APC
ADC bit depth 8 / 10 / 12 bit
Power supply 11–24 VDC, PoCXP supported
Power consumption < 10 W
Dimensions 312.5 × 166 × 80.5 mm
Weight 2.5 kg
Operating temperature 0°C to 50°C


Fitting the sensor to a battery line

The sensor draws under 10 W from an 11–24 VDC rail, supports PoCXP, and weighs 2.5 kg, so it can be mounted on the existing gantry above the welding fixture or on the scanner housing. Trigger signals from the welding controller start and stop acquisition per weld, and the resulting depth value is written to the traceability record against the part serial number. Because the measurement is optical, there is no radiation source to license and no consumable to replace.


Traceability and quality records

Every weld produces a depth value, a timestamp and a pass or fail flag. That record supports incoming audits, PPAP submissions and field failure investigations without the need to cut up a pack. For customers running statistical process control, the depth stream can be fed into the plant historian and plotted against laser power, focus offset and clamping pressure.

ST840E-28 OCT Depth Sensor Battery Tab Laser Welding Inline Inspection

ST840E-28 OCT Depth Sensor Battery Tab Laser Welding Inline Inspection

ST840E-28 OCT Depth Sensor Battery Tab Laser Welding Inline Inspection

Company Introduction:

JINSP Company Limited has received the National Science and Technology Commission Scientific and Technological Achievement Appraisal Certificate and the China Patent Excellence Award. Related products have earned the Geneva International Invention Award, the Beijing New Technology and New Product Certificate and the Zhu Liangyi Analytical Instrument Innovation Award. JINSP has focused on molecular spectroscopy and OCT spectral detection for more than 19 years and supplies OCT spectrometers, laboratory and online Raman analyzers, and on-site rapid identifiers to industrial customers worldwide. OEM customers receive a dedicated technical contact for the duration of the integration project.

ST840E-28 OCT Depth Sensor Battery Tab Laser Welding Inline InspectionST840E-28 OCT Depth Sensor Battery Tab Laser Welding Inline Inspection

FAQ:

Q1: Can the sensor inspect every weld on a pack line?


A1: Yes. The acquisition runs per weld at up to 250 kHz line rate, so inspection keeps pace with the welding cell rather than adding a separate station.


Q2: Does it work on copper and aluminium?


A2: Yes. Material-specific gain profiles are applied during reconstruction, and JINSP verifies the calibration on customer samples before delivery.


Q3: What depth range is covered?


A3: 12.9 mm of imaging depth, which covers typical tab, busbar and enclosure welds with margin.


Q4: How do I order?


A4: Contact JINSP with your joint cross-section and takt time. Minimum order quantity is one unit, delivery in 40–60 working days, payment by T/T or Western Union.

You Might Be Into These
Get in touch with us

Enter Your Message

sales@jinsptech.com
+8618620854039
8618620854039
8618620854039